Conical drier

Many industries, including in particular the pharmaceutical, food, and chemical industries, require a Powder Drier. There are a wide variety of means of achieving this either through a Vacuum Tray Dryer, Conical Drier, or Fluid Bed Drier. Whatever your specific requirements there is a Powder Dryer available to suit your purposes.

Tri Blend Action

The mixing screw rotates on its own axis and continually transports fresh material in an upward motion.

In addition, the mixing screw moves slowly around the periphery of the double cone blender.

Materials are cascaded off the screw and are distributed to the opposite side of the vessel, completing the Tri-Blend action.

Starting Under Load
Full load starting is possible with the machine as the screw is normally started and materials are placed in motion before the orbiting motion of the screw begins.
Low Floor Space Required
Since these units occupy minimal floor space, users can free up space for other plant operations. The configuration of the mixer is uniquely suited for multi-floor or mezzanine operation and smooth material flow.
Gentle Mixing
The slow speed of the mixing screw and orbiting arm assure a gentle low shear mixing action that does not degrade sensitive raw materials used in the process.
No Heat Build-up
The gentle shear forces of this machine minimize heat build-up and prevent the degradation of sensitive materials.

VACUUM DRYING SYSTEMS
Complete Vacuum Drying Systems are available to suit the needs of the individual user. The Systems are typically provided with a filter, condenser, vacuum pump and condensate receiving vessel. Complete control packages as well as Heat Transfer Systems are also available.

Efficient Mixing
Vertical Blenders typically complete a blending cycle in approximately 1/3 the time of conventional blenders.
Complete Discharge
Blended materials move to the bottom discharge valve by gravity for nearly 100 percent discharge.
Low Power Consumption
120 cu. ft. units require only 10 HP vs. 25 to 30 HP on horizontal blenders.
Improved Swing Arm Design
The internal swing arm is specially designed to allow thermal expansion and a more reliable machine when used for mixing at elevated temperatures.
Unsupported Mixing Screw
Many models of our blenders are designed to operate without bottom screw supports.